Efflorisn't 5 Gallon Concentrate (Mix 1 Gallon Water To Each Gallon Single Clean) - Ready To Use (5 Gallon)

Single Clean 5 Gallon Size (Arrives Ready To Use)

Efflorisn't 5 Gallon Size (Arrives Ready To Use)

Product Code: EFF 5G RTU Retail
Unit Price: $154.00

Clean Efflorescence Off Concrete & Brick Surfaces With Our Easy-To-Use Product!

Clean Efflorescence Off Concrete & Brick Surfaces With Our Easy-To-Use Product!

Will Clean Up To 1500 Square Feet Depending On The Porosity Of The Surface To Be Cleaned

Basic Application:

  • Do not apply Single Clean if ambient temperature is below 28 degrees F.
  • Use wire brush to remove heavy efflorescence, dirt or debris from the surface of the area to be treated. This will ensure maximum penetration of the Single Clean into the pores.
  • Apply Single Clean using a pump-up garden sprayer or an airless sprayer at low pressure. Spray area which shows signs of efflorescence thoroughly, using enough liquid to make the surface appear damp yet not causing "dripping" or "run-off". Wipe off excess to ensure even coverage.
Efflorescence Cleaner (Efflorisn't)

5 Gallon

  • Allow Single Clean to soak for one hour then clean with a hard bristled brush. Depending on the type and amount of efflorescence present, repeat Step 3 if needed.
  • Rinse using a constant water source (hose, power washer, etc.), liberally spraying down the area where Single Clean was applied.
  • Single Clean is designed to pull the efflorescence out of the pores to the surface where it can be rinsed away. Once you have removed the visible efflorescence, seal the surface with Single Seal/Freeze Protect to prevent the efflorescence from returning.

Contact Us For A Free Estimate

Please complete this form and a specialist will contact you shortly.

Fields with (*) are required.
Full Name*
Company Name
Phone Number*
Email Address*

*Note: When applying Single Clean do not allow solution to get on glass or aluminum. Etching and discoloration may occur. If Efflorisn't does come in accidental contact with any materials other than those intended, flush the area immediately with water to minimize potentially irreversible damage.

Contributing Factors to Single Clean Performance:

  • Density of Material
  • Ambient Temperature / Weather Conditions
  • Moisture Content of Material
  • Amount / Type of Efflorescence Present
  • Source of Efflorescence
  • Previous Treatments (e.g. Sealants) Applied to Surface
  • Age of Material

To become a distributor of Single Clean, call us today at 855-906-5851